Teach you 3 recruit self check brake condition

2022-05-10 0 By

The replacement cycle of automobile brake pads is relatively long, so we usually are not very concerned about this, but we all know the importance of brake pads is self-evident.So, you can have a good time to check their brake pads, whether it needs to be replaced.We can see from the following 1 brake pad thickness when the brake pad thickness becomes very thin, brake performance will significantly decrease, affecting driving safety.The thickness of the general new brake pad is about 1.5cm, when the brake pad wear to only 0.5cm, you will increase the frequency of self-inspection.When the brake pad wear to only 0.3cm when you must be replaced in time, this is the brake disc drunk thin replacement is now, do not drag, minutes caused a car accident.In addition, both sides of each brake pad have a protruding sign, the thickness of the mark in two or three millimeters, if the brake pad thickness has been parallel to the mark, it must be replaced.Some high-end models, in the brake pad is too thin instrument brake light position will be prompted, the owner of timely attention.Listen to the brakes. When you hit the brakes, try listening to the sound of the brakes.If you hear a sharp sound like iron grinding iron, you should pay attention to the brake pad on both sides of the current mark has directly friction brake disc, proof that the brake disc has exceeded the current, this time must be replaced.You should also know that brake pads cost a lot more than brake pads, so you should not only replace the brake pads, but also check the brake pads.3. Brake response and Stroke When the brake pads become thinner, the brake response of the car also becomes slower, and we need to press the brake deeper and harder to achieve the previous braking effect.When you find that the first half of the brake effect is significantly weakened, the brake becomes soft, there is a little brake, you have to check whether the brake pads need to be replaced.